TMT Bar Price Today in India — Fe 500D & Fe 550D Rate per Kg & MT
Get today's TMT Bar price in India. Fe 500D, Fe 550D rates per kg and MT in Raipur, Mumbai, Delhi, Hyderabad, and pan-India. 8mm to 40mm diameters — updated daily pricing.
TMT Bar Price in India — Market Overview
TMT Bars (Thermo-Mechanically Treated reinforcing bars) are the most consumed steel product in India by volume, used in virtually every concrete structure from PMAY housing to metro rail viaducts, bridges, and high-rise towers. India produces over 50 million MT of TMT bars annually, with prices determined by a complex interplay of scrap prices, sponge iron rates (especially for induction furnace-based producers), power costs, and construction sector demand cycles. Raipur is one of the most significant TMT-producing regions in India, with dozens of re-rolling mills converting locally-produced billets into TMT rebar for pan-India consumption.
What Determines TMT Bar Price?
Get Today's TMT Bar Rate
Prices updated market-basis. Call or WhatsApp for today's confirmed ex-Raipur and delivered rates for your city.
Price Disclaimer
Prices shown are indicative market reference ranges based on prevailing conditions. Actual prices depend on quantity, grade, delivery location, and payment terms. Prices marked * are exclusive of freight and GST (18%).
TMT Bar Price — Grade & Size Wise
*Indicative ranges — Ex-Raipur, excluding freight and GST. Valid for reference only. Call for confirmed pricing.
Last updated: 17 July 2026
*All prices in Indian Rupees (₹) per Metric Tonne (MT). Exclusive of freight and 18% GST. Contact +91 7587051838 for confirmed current pricing.
How to Calculate TMT Bar Weight & Cost
Use this step-by-step calculation to estimate your tmt bar requirement and budgeted material cost.
TMT Bar Procurement Tips from Industry Experts
Always demand IS 1786 certification and MTC specifying Fe grade, heat number, and chemical + mechanical test results for each lot.
Insist that billing is done on theoretical weight (D²/162 formula) — some suppliers try to bill on excess actual weight from mis-shapen or overweight bars.
For seismic zone III, IV, or V construction, always use Fe 500D — not plain Fe 500 — as IS 13920 (ductile detailing) explicitly requires the 'D' grade.
When comparing prices, always compare on a delivered (freight included) basis — an apparent ₹1,000/MT saving can disappear in freight differences.
For large housing project orders, consider negotiating a price-lock for 90–120 days at order stage to protect project margins against volatile TMT prices.
SAIL brand TMT has the highest credibility for government project audits — if your project requires CPWD or NHAI compliance, specify SAIL explicitly.
TMT Bar Price FAQs
Q. What is today's TMT bar price per kg in India?
TMT bar (Fe 500D) prices in India currently range from approximately ₹50 to ₹68 per kg (₹50,000–₹68,000 per MT) depending on diameter, brand, location, and market conditions. Contact RLG Ispat at +91 7587051838 for today's exact ex-Raipur rate and delivered pricing for your city.
Q. What is the difference between Fe 500 and Fe 500D TMT?
Fe 500D has higher ductility than plain Fe 500 — it must achieve a UTS/YS ratio ≥ 1.15 and total elongation ≥ 16% as per IS 1786. The 'D' designation is mandatory for seismic zone III, IV, and V construction per IS 13920. Price difference is typically ₹500–₹1,500/MT.
Q. Which brand TMT is best for construction in India?
SAIL, Tata Tiscon, JSPL Rebar, and Jindal Panther are the most recognized primary mill TMT brands. All must conform to IS 1786, but primary mill material offers superior consistency in grade and chemistry. Local re-rollers can also produce IS 1786 compliant material at lower prices but require careful MTC verification.
Q. Does TMT price vary by diameter in India?
Yes, marginally. In active markets, 8mm and 10mm TMT may carry a slight premium (₹500–₹1,500/MT) over 16–25mm due to the higher number of rolling passes required. Heavy diameters (32–40mm) can sometimes be slightly cheaper as they require fewer passes.
Q. What HSN code and GST rate applies to TMT bars?
TMT bars fall under HSN Code 7214 (other bars and rods of iron or non-alloy steel) and attract 18% GST. This is fully ITC-eligible for registered businesses purchasing for construction or manufacturing purposes.
Q. What is the minimum order for TMT bars from RLG Ispat?
Standard minimum is 5 MT for any diameter. For full trailer loads (20–25 MT), we offer better freight economics. For ex-yard pickup in Raipur, smaller quantities can be arranged based on availability.
Ready to Place a TMT Bar Order?
Our sales desk confirms availability, pricing, and dispatch timeline within 2 hours of enquiry. GST invoice, e-way bill, and MTC included with every delivery.
